Honda Odyssey Service Manual: Steering Lock Replacement (With Keyless Access)

Honda Odyssey Service Manual / Accessories / Security & Keyless Entry / Ignition/Push Start and Steering Lock / Steering Lock Replacement (With Keyless Access)

  1. Remove the steering column.

  1. Center-punch both of the shear bolts (A), and drill their heads off with a 5.0 mm (0.197 in) drill bit. Be careful not to damage the steering lock (B) when removing the shear bolts.

    2. AB

  2. Remove the shear bolts from the steering lock, then remove the steering lock.


  1. Install the steering lock.

  1. Loosely tighten the new shear bolts.

  1. Tighten the shear bolts (A) until the hex heads (B) twist off.

    2. AB

  2. Install the steering column.

  3. Do the keyless access system registration.

    Steering Lock Replacement

    Immobilizer

    See More:

    Honda Odyssey Service Manual > Crash Sensors: Side Impact Sensor (Second) Replacement
    Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the sliding door sill trim. Disconnect the side impact sensor (second) 2P connector (A) on the left or right wire harness. ABC Remove the TORX bolt (B) using a TORX T30 bit, then remove ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.01