Honda Odyssey Owners Manual: Storing a Position in Memory

1. Adjust the driver’s seat and the outside mirrors to the desired position, and turn the ignition switch to ON .
2. Press the SET button.
►You will hear the beeper, and the memory button indicator light will blink.
3. Press and hold memory button 1 or 2 within five seconds of pressing the SET button.
►Once the seat and the outside mirrors position has been memorized, the indicator light on the button you pressed stays on.

After you press the SET button, the storing operation will be canceled when:
• You do not press the memory button within five seconds.
• You readjust the seat position before the doublebeep.
• You readjust the outside mirrors.
• You turn the ignition switch to any position except ON .

    Driving Position Memory System

    Recalling the Stored Position

    See More:

    Honda Odyssey Service Manual > Secondary: Checking and Adjusting the Headliner/Pillar Trim Overlap
    To prevent the side curtain airbag from deploying and damaging the pillar trim (A-pillar trim, B-pillar trim, C-pillar trim, D-pillar trim), the overlap between the headliner and pillar trim must be less than 8 mm(0.31 in)   To check the overlap, do this: NOTE: This illustration shows the ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0059