Honda Odyssey Service Manual: Receiver/Dryer Desiccant Replacement

Honda Odyssey Service Manual / HVAC / Cooling / Receiver/Dryer Desiccant Replacement

NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air.

  1. Remove the A/C   condenser.

  1. Remove the cap (A) from the bottom of the A/C   condenser. Remove the O-ring (B) and the desiccant (C).

  2. A2.9 N?m (0.30 kgf?m, 2.1 lbf?ft)CBReplace.
  3. Install the receiver/dryer in the reverse order of removal, and note these items:

    • If you are installing a new desiccant, add refrigerant oil (DENSO ND-OIL 8)

    • Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) before installing them. Be sure to use the correct O-rings   for HFC-134a (R-134a) to avoid leakage.

    • Install the cap to the specified torque. It is made of plastic and can be easily stripped.

    A/C Compressor Relief Valve Replacement

    Blower Motor

    See More:

    Honda Odyssey Service Manual > Suspension: Ball Joint Boot Inspection/Replacement
    Special Tools Required Clip Guide, 44 mm 07GAG-SD40700 Clip Guide, 41 mm 07974-SA50700 Front lower arm/Rear upper arm Check the ball joint boot for weakness, damage, cracks, and grease leaks. NOTE: If the ball joint boot is damaged and leaks grease, replace the appropriate part as an assembly. If th ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0066