Honda Odyssey Service Manual: Tailgate Outer Handle Switch Test/Replacement

Honda Odyssey Service Manual / Body / Doors and Enclosures / Trunklid/Tailgate/Cargo Doors / Tailgate Outer Handle Switch Test/Replacement

Test

  1. Remove the tailgate lower trim panel.

  1. Disconnect the 2P connector (A) from the tailgate outer handle switch.

    2. 1 2 A

  1. Check for continuity between the terminals in each switch position according to the table.

    2. TerminalPosition2SWITCH PRESSEDSWITCH RELEASED 1??

  1. If the continuity is not as specified, replace the tailgate outer handle switch.


Replacement

  1. Removal the tailgate lower trim panel.

  1. Disconnect the 2P connector (A) from the tailgate outer handle switch.

    2. A

  1. Remove the two nuts (A).

    2. BA

  1. If equipped, disconnect the rearview camera 6P [12P] connector (B).

    [ ]: With navigation

  1. Replace the tailgate outer handle switch (A).

    2. A

    NOTE: The illustration shows with rearview camera.

  1. Install the new switch in the reverse order of removal.

    Tailgate Latch Replacement

    Body Exterior

    See More:

    Honda Odyssey Service Manual > Blind Spot Monitor: Blind Spot Information System (BSI)   Radar Unit Inputs and Outputs
    1 2 3 4 5 6 Terminal side of female terminalsLEFT SIDE BSI RADAR UNIT 6P CONNECTOR Terminal number Wire color Terminal name Description Signal 1 LT GRN IG1 ECU RR(7.5A) Power supply for the BSI radar unit Vehicle in ON mode: Battery voltage Vehicle in OFF mode: About 0 V 2 RED DR BSI IND+ Drives th ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0142