Honda Odyssey Service Manual: Sliding Door Guide Pin Replacement

Honda Odyssey Service Manual / Body / Doors and Enclosures / Doors / Vertical and Horizontal Adjustment at the Rear / Sliding Door Guide Pin Replacement

  1. Remove the guide pin covers (A), then remove the guide pins (B).

    2. B8 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft)AApply thread lock.

  2. Install the guide pins in the reverse order of removal, and apply medium strength liquid thread lock to the threads of the guide pins before reinstallation.

CESS Articulated Harness Replacement

  1. Remove the sliding door sill trim, and the sliding door panel.

  1. Disconnect the connectors (A) from the CESS articulated harness (B).

    2. With power sliding door

    ABA

    Without power sliding door

    ABA

  2. Remove the bolt and two screws, then remove the CESS articulated harness.

  3. Install in the reverse order of removal.

    Sliding Door Center Rail Replacement

    Power Sliding Door Switch Test/Replacement

    See More:

    Honda Odyssey Service Manual > Rear A/C System Description: Rear A/C Control Unit   Inputs and Outputs
    1 7 2 8 3 9 4 1 0 5 1 1 6 1 2 REAR A/C CONTROL UNIT CONNECTOR A (12P)Wire side of female terminals CONNECTOR A Cavity Wire color Terminal name Description Signal 1 PNK M-HOT-Rr Output to drive rear air mix control motor to HOT side With ignition switch ON (II) and rear air mix control motor moving ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0176