Fuel Information ■ Fuel recommendation Unleaded gasoline, pump octane number 87 or higher Use of a lower octane gasoline can cause a persistent, heavy metallic knocking noise that can lead to engine damage. ■ Top tier detergent gasoline NOTICE We recommend quality gasoline containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend the use of gasoline that does NOT contain harmful manganese-based fuel additives such as MMT, if such gasoline is available. Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact a dealer for service. Some gasoline today is blended with oxygenates such as ethanol. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline. Qualifying gasoline retailers will, in most cases, identify their gasoline as having met “TOP TIER Detergent Gasoline” standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. The proper level of detergent additives, and absence of harmful metallic additives in gasoline, help avoid build-up of deposits in your engine and emission control system. For further important fuel-related information for your vehicle, or on information on gasoline that does not contain MMT, visit www.hondacars.com. In Canada, visit www.honda.ca for additional information on gasoline. For more information on top tier gasoline, visit www.toptiergas.com. ■ Fuel tank capacity: 21 US gal (79.5 liters) How to Refuel 1. Stop your vehicle with the service station
pump on the left side of the vehicle in the
rear. WARNING You can be burned or seriously injured when handling fuel.
• Stop the engine, and keep heat, sparks,
and flame away. 4. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap. 5. Place the fuel fill cap in the holder. The filler nozzle automatically stops to leave space in the fuel tank so that fuel does not overflow as a result of changes in air temperature. If the filler nozzle keeps turning off when the tank is not full, there may be a problem with the pump's fuel vapor recovery system. Try filling at another pump. If this does not fix the problem, consult a dealer. Do not continue to add fuel after the nozzle has automatically stopped. Additional fuel can exceed the full tank capacity. |
Honda Odyssey Service Manual > Crash Sensors: Side Impact Sensor (Second) Replacement
Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the sliding door sill trim. Disconnect the side impact sensor (second) 2P connector (A) on the left or right wire harness. ABC Remove the TORX bolt (B) using a TORX T30 bit, then remove ...